PROJECTS

LIBRARIES

RESOURCES

LINKS

CONTACT

Select category:

Arduino

chipKit

ESP8266/32

TI LaunchPad

IF YOU LIKE,
and use any of my projects or libraries, and would like to encourage further development you can donate through PayPal here:

Rather donate hardware directly? Then click here.

Library: UTFT

This library is the continuation of my ITDB02_Graph, ITDB02_Graph16 and RGB_GLCD libraries for Arduino and chipKit. As the number of supported display modules and controllers started to increase I felt it was time to make a single, universal library as it will be much easier to maintain in the future.

Basic functionality of this library was origianlly based on the demo-code provided by ITead studio (for the ITDB02 modules) and NKC Electronics (for the RGB GLCD module/shield).

This library supports a number of 8bit, 16bit and serial graphic displays, and will work with both Arduino, chipKit boards and select TI LaunchPads.
The library works great with the ITDB02 series of display modules from ITead Studio, the TFT01 series of display modules from ElecFreaks, and the RGB LCD Shield and module from NKC Electronics.

IMPORTANT:

Due to the size of the library I do not recommend using it on ATmega328 (Arduino 2009/Uno) and ATmega32U4 (Arduino Leonardo) as they only have 32KB of flash memory.

It will work, but you will be severely limited in available flash memory for your application.

Download:

UTFT.zip
(Filesize is 2577.14 KiB. Downloaded 409961 times)

Some demos showcasing most of the functions are included in the download.
This is a multi-platform library that will work with several different development board types.

Latest changes:

v2.80	17 May 2015	•	added support TI CC3200 LaunchPad
		•	fixed a bug with transparent text so it is faster than it was
		•	updated tools to support TI CC3200 LaunchPad
v2.81	21 May 2015	•	fixed a bug which stopped the library from compiling with Arduino 1.6.x
v2.82	12 Jul 2016	•	added support for the new 3.2" (Rev2 ILI9341-based) display module from Coldtears
		•	TFT controllers used only by display modules and shields that have been retired are now disabled by default
v2.83	06 Aug 2018	•	added support for the V2 displays and shields from ITead
		•	removed all support for display modules from ElecFreaks