HOME    PROJECTS    LIBRARIES    RESOURCES    LINKS    CONTACT  
Select category:
Arduino
chipKit
  DS1307
  DS3231
  DS3234
  KeyPad
  LCD5110_Basic
  LCD5110_Graph
  LCD5110_SPIflash
  LEDmatrix7219
  MCP4725
  MGLCD
  OLED_I2C
  OLED_SPIflash
  OLED_StatusIcons
  relay8
  SPIflash
  URTouch
  UTFT
  UTFT_Buttons
  UTFT_Geometry
  UTFT_SPIflash
  WiiChuck
TI LaunchPad

IF YOU LIKE,
and use any of my projects or libraries, and would like to encourage further development you can donate through PayPal here:

Rather donate hardware directly? Then click here.




Library: OLED_StatusIcons

This library is an add-on to OLED_I2C and will not work on its own.

OLED DisplayOLED Display

This library will allow you to display an interrupt-driven status bar with icons on the display. The status bar can be positioned either at the top or the bottom of the display, and the icons can be left or right aligned.

The library supports 8x8 and 16x16 pixels icons but you cannot mix the two sizes. Only one size can be used at a time.

 IMPORTANT: 

This library uses Timer1 for the status bar interrupt. This may cause conflicts with other libraries. The timer interrupt is only used while the status bar is running/active.

Download:

OLED_StatusIcons.zip
(Filesize is 353.03 KiB. Downloaded 2363 times)


Some demos are included to demonstrate most of the functions.
This is a multi-platform library that will work with several different development board types.

Changes:
v1.001 Mar 2015initial release

Compatibility:

WorkingchipKit Uno32
WorkingchipKit uC32
WorkingchipKit Max32
Working = Working   Not working: Not working
Not tested, Unsupported = Not tested, Unsupported

Manual:

CLICK HERE TO VIEW
The manual is included in the download

License:

By downloading the library you accept the following license:
Creative Commons BY-NC-SA Logo
Creative Commons (CC BY-NC-SA 3.0)
View SummaryView Legal